当前位置: HOME > News > Industry dynamic

What are the performance characteristics of automatic labelling machines?

Origin of the article: Author: 2018-09-12 18:25:05

Automatic labeling machine is divided into semi-automatic labeling machine and automatic labelling machine. It is suitable for the tank diameter, 30-300 - mm height of tank: 40-600 - mm round or square GuanPing cylinder body of the whole circular labeling, also can be carried out under the week or dissatisfaction with the whole body of labeling, widely used in food and beverage, pesticide chemical industry, paint coating, medicine health care industries miewenying pesticides, air fresheners, since the spray paint, plastic expansion, butane gas, leather polishing agent, etc.

Automatic labelling machine is composed of industrial computer automatic control electrical system (Chinese and English interface), RTM servo motor, pneumatic parts and color standard detection system.

Work procedure: automatic loading of tank body, label cutting, gluing, positioning, adhesion, pressing and the hot shrinkage of the top and bottom of the tank are all completed automatically, and have a 15 - phase alarm system.

Label quality: the cutting pattern is complete and not deformed; At the end of the network glue, compared with the foreign all-spraying rubber equipment, save the heat solution 50%; Correction of the deviation of 0.05mm (mm); The label of the upper and lower mouth is tightly closed. The whole labeling surface is smooth, no misplacement, no leakage, no glue.

The beginning of the working process is to enter the box at a constant speed on the conveyor belt. Mechanical fixture on separate box between a fixed distance, and push box along the conveyor belt direction labeling machine mechanical system includes a driving wheel, a label wheel, and a scroll. The driving wheel intermittently drives the label belt movement, the label belt is pulled out of the scroll, and the label wheel will press the label to the box. On the scroll, the displacement control of the open loop is used to maintain the tension of the label band because the label is closely connected with each other on the tag belt, so the label belt must stop continuously.

The label is attached to the box at the same speed as the box. When a conveyor belt reaches a particular location, the tag drive wheel accelerates to the speed with which it matches the conveyor belt, then slows to a stop after labeling.

Because the tag has a potential to slide, it has a registration mark on it to ensure that each tag is properly placed. The registration mark is read by a sensor, and in the tag belt deceleration phase, the driver will reposition the position to correct any position errors on the label.




重庆时时彩 王者彩票开户 重庆时时彩 重庆时时彩 优优彩票APP 奔驰彩票开奖 天津11选5分布走势图 重庆时时彩 重庆时时彩 博乐彩票